Responsive image

Industrial

Description

8-Port 10/100/1000BaseT (PoE) + 2-Port 1000FX (SFP)

DP1026GF-24V is a 8-port 10/100/1000BaseT PoE and 2-port 1000Mbps SFP Industrial Gigabit IEEE 802.3af/at PoE Switch for power input from 24VDC~48VDC 120W. It supports a total PoE output power budget at maximum 100W for the 8-port RJ45 Gigabit connections. This slim switch is designed with Wall-mountable or DIN rail mountable, making installation more easy.

Besides redundant power supply with overload current protection, it embeds with power din and 6-pin terminal block to prevent from power failure event and with sufficient power of up to 5A. It supports dual power backup to ensure system power loss immunity.

With 24V 120W input power, the 8-port 10/100/1000Base-T PoE Switch may support up to 30W for each PoE port and with a total power budget of maximum 100W for all the 8 PoE ports. For input voltage higher than 24V, the maximum input power is at 120W.

The DP1026GF-24V is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It also passed stability testing such as free fall, shock and vibration.

The DP1026GF-24V can be used in extreme environments with an operating temperature range of -40 ~ 75 degree Celsius.

DP1026GF-24V


  • System Interface/Performance
     -RJ-45 port support Auto MDI/MDI-X Function
     -Store-and-Forward Switching Architecture
     -Back-plane (Switching Fabric): 20Gbps
     -8K MAC address table
  • Supports Wide Operating Temperature (-40 ~75 degree Celsius)
  • IP-30 Metal Housing with DIN Rail and Wall Mount Design
  • 24V~48VDC Redundant Power Input (Power Din & Terminal Block) up to 5 Amp for power backup
  • Polarity reverse protection & removable terminal block
  • 8-Port IEEE802.3af/at PoE Standards
  • Support upto 30W for each PoE port
  • 2-Port Gigabit Fiber SFP connector
SPECIFICATIONS
IEEE Standards IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX /FX
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-SX/LX
IEEE802.3x Flow Control and Back Pressure
IEEE 802.3bt/at/af, PoE++
Switch Properties Back-plane (Switching Fabric): 20Gbps Packet
throughput ability (Full-Duplex): 1,488,100pps
@64bytes
Transfer Rate 14,881pps for Ethernet port
148,810pps for Fast Ethernet port
1,488,100pps for Gigabit Ethernet port
Connectors 10/100/1000TX: 8 x RJ-45 with auto MDI/MDI-X function
1000M fiber: 2 x 1000Mbps SFP slot for Single-mode or Multi-mode type fiber cable
MAC Address 8K MAC addresses
Processing Store-and-Forward
Network Cable 10BaseT: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable EIA/TIA-568 100-ohm (100m)
100/1000BaseT: 2-pair UTP/STP Cat. 5, 6 cable EIA/TIA-568 100-ohm (100m)
Optical Cable Multi-mode: 50/125um~62.5/125um
Single-mode: 9/125um
Available distance: 2km (Multi-mode) / 30km (Single-mode)
Wavelength: 1310nm (Multi-mode / Single-mode)
Protocol CSMA/CD
Case Dimension Metal case, IP-30; 44mm(W)x105mm(D)x150mm(H)
Weight 620g
LED Power Indicator: Green x 2 for PWR1 and PWR2
LAN
Green ON/Flashing for 1000M Link/Act
Amber ON/Flashing for 10/100Mbps Link/Act
PoE
Amber ON for PoE
Power Supply 24V~48VDC 120W, Redundant power with polarity reverse protect function and removable terminal block PWR1 (Power Din), PWR2 (6-pin Terminal Block) up to 5 Amp
Consumption 3.76 Watts (Full load: Only Ethernet)
Overload Current Present
Reserve Polarity Present
Operating Humidity -40~75 degree Celsius / -40~167 degree Fahrenheit
Storage Temperature -40~85 degree Celsius / -40~185 degree Fahrenheit
EMI/EMS FCC Class A
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
CE EN55022 Class A, CE EN55024
Stability Testing IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Warranty 2 years
no abstract ...