Responsive image

Industrial

Description

This rugged designed high power 4 port industrial POE+ Injector is equipped with our high efficiency ColdDesign technology which allows input voltage to meet IEEE802.3af/at standard, also reduce the excessive heat problem to a minimum. And it is also equipped with 2 ports 100M fiber(optional models) that can be used as fiber redundancy, cascaded to your other devices to expand your network application. It is being rigorously tested for your Security, Transportation and Telco application.

DW642TSC


no abstract ...

Specification IEEE Standard - IEEE 802.3 10Base-T Ethernet - IEEE 802.3u 100Base-TX Fast Ethernet - IEEE 802.3u 100Base-FX Fast Ethernet - IEEE802.3x Flow Control and Back Pressure, - IEEE802.3af for POE - IEEE802.3at for POE+ Switch Architecture - Back-plane (Switching Fabric): 1.2Gbps Data Processing - Store and Forward Flow Control: - IEEE 802.3x Flow Control and Back Pressure Jumbo Frame - 9KB MAC address Table Size - 1K Packet Buffer Size - 1M Network Connector : - 5xRJ-45 10/100BaseT(X) auto negotiation, - 4 10/100M POE+ 802.3at/af PSE port - Auto MDI/MDI-X function, Full/Half duplex - 1 x 10/100BaseT, MM SC 2km Network Cable - UTP/STP above Cat.5e Cable - EIA/TIA-568 100-ohm (100m) - Fiber Cable (Multi-mode):50/125um,62.5/125um - Fiber Cable (Single-mode): 9/125um Protocol - CSMA/CD LED - PW1(Power 1) Green, - PW2(Power 2) Green, - ERR( Fault ) Amber, - TX/RJ-45 port: > LNK (Link/Active) Green, > SPD(Speed) 10/100(OFF ) ,1000 (Green) - Fiber Per port: > Link (Green) > Active Flash - POE port ON/OFF Reserve polarity protection - Present Overload current protection - Present Power Supply - Redundant Dual DC 12V-55V Power Input, 44VDC-55VDC for POE Power Consumption - 3.76W@48 VDC full load, Without POE Alarm Relay Contact - Relay outputs with current carrying capacity of 1 A @24VDC, - Relay in short circuit mode when 2 powers are connected. in open circuit mode when only one power supply is connected POE power - POE power per port 30watts at 48VDC input - Maximum total power 120Watts Removable Terminal Block - Provide 2 Redundant power , Alarm relay contact ,6 Pin - Wire range: 0.34mm^2 to 2.5mm^2 - Solid wire (AWG):12-24/14-22 - Stranded wire(AWG): 12-24/14-22 - Torque:5lb-In/0.5Nm/0.56Nm - Wire Strip length: 7-8mm Operating Temperature - -40℃~75℃ fully tested. POE efficiency - Voltage efficiency up to 97% from 48VDC to 55VDC. Surface temperature - Surface temperature rises 6℃ full load in a 75℃ chamber Operating Humidity - 5% to 95% (Non-condensing) Storage Temperature - -40℃~85℃ MTBF (mean time between failure) - 1,510,304 hrs ( MIL-HDBK-217F) at 25℃ Housing - Rugged Metal ,IP30 Protection Case Dimension (W X D X H) - 142mmx43mmx105mm (LxWxD) Installation mounting - DIN Rail mounting and Wall Mounting EMC/EMS - CE, FCC EMI - FCC Part 15 Subpart B Class A, - CE EN 55022 Class A

Responsive image