Power Over Ethernet
LAN Switch
Fiber Gigabit Media Converter
With IEEE802.3bt 90W PoE Injector
PF211GB is a 10/100/1000Base-T to 100/1000Base-FX GbE media converter, which allows one Ethernet UTP RJ-45 port to be inter-changeably connected to one Fiber SFP port. In addition, the RJ-45 port is compliant with IEEE802.3bt/at/af standards to provide up to 90Watt Power over Ethernet (PoE). This AC powered PoE media converter is a Power Sourcing Equipment Plus (PSE+: Means PoE High Power Output Device) which combines data over a UTP link with 56VDC power, providing power to IEEE802.3at/af or IEEE802.3bt powered device (PD) over the existing CAT5 UTP cable.
The PF211GB converter includes a PD signature sensing and power monitoring features. The PoE features over-current protection (OCP), over-voltage protection (OVP), and over-temperature protection (OTP). With the Link Fault Pass-through (LFP) function, the PF211GB can monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. It then sends out the far end fault (FEF) signal to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered. Then the link partner will synchronously stop sending data. FEF prevents loss of valuable data transmitted over invalid link. Combining the LFP and FEF troubleshooting features of PF211GB, both end devices can be notified of a loss of fiber link.
Specifications | |
---|---|
Standards | IEEE802.3 10Base-T IEEE802.3u 100ase-TX IEEE802.3z/ab 1000Base-T 1000Base-FX IEEE802.3x full-duplex flow control |
Connectors | Copper UTP port Cat5e cable up to 100m Fiber multi-mode for 1-2km single-mode for 10-50km |
Power | Input:100~240VAC, 47~63 HzOutput:56VDC up to 90Watts |
Ambient Temperature | 0~50 degree C |
Humidity | 5~90% |
Network Cable | 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable EIA/TIA-568 100-ohm (100m) |
Case Dimension | 39(H) x 85(W) x 205(D) mm |
Certification | FCC Part 15 Class A, CE Mark |