Responsive image

Managed Switch

Description

10G Managed Fiber Switch, 28p GbE SFP, 4p GbE UTP, 4p 10G

FS2844GTX is the smart access switch for carrier’s IP MAN and enterprise networks. Based on the new-generation high-performance hardware, it supports functions such as powerful ACL, flexible QinQ, 1:1 or N:1 VLAN switching, Ethernet OAM, carrier-level QoS and industry-level 10G Ether-ring, ensuring this switch meets application requirements of all kinds among many office sites.

FS2844GTX


    Advanced Hardware Architectureand Industry-Leading Port Intensity

  • 1U box-shaped switch with 28 SFP ports, 4 GE ports and 4 10G SFP+ ports with high-performance ASIC switch chip

    • Carrier-class Ethernet Switches

  • Supports carrier Ethernet ring network protection protocol. The protection switching time is less than 50ms. It also supports simple and effective redundancy protection mechanism such as STP/RSTP/MSTP protocol and dual uplink standby link protection and LACP link aggregation. These functions meet the requirement of carrier grade high reliability.
  • Perfect Ethernet OAM, which can real time monitor the network operating state and rapidly detect and locate the malfunction.
  • Supports strong ACL function. The solution supports L2~L7 data access and control based on the physical port, VLAN IDs, source MAC/IP addresses and protocol port, which provides flexible ways of policy control.
  • Supports various L2 multicast function, including IGMP-Snooping, user fast-leave mechanism and cross VLAN multicast replication function.

    • Carrier QoS Policies

  • Supports complex traffic classification based on VLAN, source MAC/IP addresses, destination MAC/IP addresses, IP protocols, or priorities. It also supports priority remark. These functions provide an effective way for users to optimize their businesses.
  • Provides flexible bandwidth control policies and support a port base or flow-based Committed Access Rate (CAR) and guarantees Layer 3 line-speed forwarding.
  • Every port supports 8 priority queues.
  • Supports multiple queue grooming algorithms such as SP, WRR or SP+WRR.

    • Comprehensive IPv6 Solutions

  • Supports IPv6 based Ping, Traceroute, Telnet, SSH, ACL, meeting the need of IPv6 network equipment management and service control.

    • Comprehensive Security Mechanisms

  • Advanced hardware architecture design, realizing the hierarchical scheduling and protection of the packet. It provides multiple security measures to defend against DOS or TCP attacks; and supports command line authority control based on user levels.
  • Comprehensive Security Certification: Complies with IEEE 802.1x, Radius, BD Tacacs+.
  • Supports the suppression of broadcast, multicast and unknown unicast packet, ensuring the equipment can operate normally in harsh network conditions.
  • Perfect loop detection mechanism.
  • Supports the port isolation in a same VLAN and DHCP-Snooping, IP+MAC+ port binding.

    • Convenient Management and Maintenance

  • Supports multiple management styles such as Console, Telnet, SSH
  • Supports WEB based management. The management is more simple and effective.
  • Supports upload and download of TFTP files.
  • Smart SNMP Network Management Software which supports network element auto-discovery, topology management, equipment configuration management, performance data analysis, and fault management. Network management is simplified and the user gets a new product experience.

Hardware Specification
Key Components VSC7448
Interface SFP(1G) Port: SFP x 28
Uplink Port: RJ45 (GE)x 4 & SFP+(10G) x 4
MGMT Port: RJ45 x 1
Console Port: RJ45 x1
Button: Reset button x 1
Standard IEEE 802.3 10Base-T 10Mbit/s Ethernet
IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit/s Ethernet over twisted pair
IEEE 802.3z 1000Base-X Gigabit/s Ethernet over Fiber-Optic
IEEE 802.1d STP (Spanning Tree Protocol)
IEEE 802.1w RSTP (Rapid Spanning Tree Protocol )
IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
ITU-T G.8032 /Y.1344 ERPS (Ethernet Ring Protection Switching)
IEEE 802.1Q Virtual LANs (VLAN)
IEEE 802.1X Port based and MAC based Network Access Control,
Authentication
IEEE 802.3ad Link aggregation for parallel links with LACP(Link Aggregation Control Protocol)
IEEE 802.3x Flow control for Full Duplex
IEEE 802.1ad Stacked VLANs, Q-in-Q
IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
RFC 2328, 5340 OSPF
LED Indication Power: Green LED
 Off : power off or fail
 On : power on
System: Green LED
 Off: power off or fail
 On: system is working.
 Blinking: system booting up
SFP LED:
 Off: port disconnected or link fail
 Green: 1000 Mbps connected
 Amber: 10/100Mbps connected
 Blinking: sending or receiving data
RJ45 LED:
 Off: port disconnected or link fail
 Green: 1000 Mbps connected
 Amber: 10/100Mbps connected
 Blinking: sending or receiving data
SFP+ LED
 Off: disconnected or fail
 Blue: 10Gbps connected
 Green: 1000Mbps connected
 Blinking: sending or receiving data
MAC Address Table 32 K
Switching capacity 80Gbps
Forwarding rate 148Mpps
Transmission Method Store-and-Forward
Reset Button Reset default
Power Requirement Internal power supply: 100-240VAC, 50/60Hz
Power Consumption 55W
Dimension 440(W) × 193(D) × 44(H)mm/ 3kgs
Rack Mountable Support 19’’ 1U design (Bracket included)
Temperature -10℃~50℃
Humidity Operating : 10%-90% Non-condensing
Store : 5%-95% Non-condensing
Software Specification
MAC exchange Static configuration and dynamically learning of MAC address
Check and delete MAC address
Configuring of MAC address aging time
Limit on MAC address learning number
MAC address filtering function
Black-hole MAC items
VLAN Support 4K VLAN entries
GVRP
QinQ
Private VLAN
STP 802.1D(STP) 802.1W(RSTP) 802.1S(MSTP)
BPDU protection, root protection, and loopback protection
EAPS
ERPS
Multicast IGMP v1/v2/v3
IGMP Snooping
IGMP Fast Leave
Multicast group policy and multicast number limit
Multicast traffic cross VLAN duplication
IP Routing Static route
OSPF
VRRP
DHCP DHCP Server
DHCP Relay
DHCP Client
DHCP Snooping
ACL Layer2/3/4 ACL
IPv4, IPv6 ACL
VLAN ACL
QoS Flow classification based on L2/L3/L4 protocols
CAR flow limit
802.1P/DSCP priority re-labeling
SP, WRR and “SP+WRR”
Congestion avoidance mechanisms like Tail-Drop and WRED
Flow monitoring and flow shaping
Security L2/L3/L4 ACL flow identification and filtration
DDoS attack prevention, TCP’s SYN Flood attack prevention, UDP Flood attack prevention, etc
Broadcast/multicast/unknown unicast storm-control
Port isolation
Port security, and “IP+MAC+port” binding
DHCP snooping and DHCP option 82
IEEE 802.1x authentication
Radius BDTacacs+ authentication
Level-based command line protection
Reliability Static / LACP aggregation
Ethernet OAM
Management Console, Telnet, SSH2.0
Browser-based WEB management
SNMP v1/v2/v3
TFTP file upload and download
RMON
EMI/Safety
Safety LVD EN62368:2014
EMC FCC Part 15, Subpart B:ANSI C63.4-2014 (Class A)
CE EN55032: 2010+AC:2011(Class A) / EN55024: 2010+A1:2015(Class A)
no abstract ...