Products
-
Power Over Ethernet
LAN Switch
- E1 T1 LAN GW
- VoIP
- SHDSL EFM
- EoCoax
- Recording Server
- Media Converter
- Industrial
- Surge Protector
Industrial
Description
8-Port 10/100TX with 8 PoE Injector Industrial Un-managed Switch
The DW800-E is a 8-port 10/100TX with 8 PoE Injector Industrial PoE Switch for plug-and-play installation. This slim switch is designed with Wall-mountable or DIN rail mountable, making installation more easy.
Besides redundant power supply with overload current protection,. Featured with relay contact to alarm system function, the DW800-E can immediately notify of power failure event.
The DW800-E is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It also passed stability testing such as free fall, shock and vibration.
The DW800-E is the best Industrial switch to connect with IP Camera, Wireless Equipments where are placed outdoor or in tight space cabinet. The DW800-E can be used in extreme environments with an operating temperature range of -40℃ to 75℃.
The DW800-E is the high power model which provides higher power output up to 30W per port for devices that require higher power supply.
DW800-E
- System Interface/Performance
-RJ-45 port support Auto MDI/MDI-X Function -Embedded 8-port PoE Injector Function -Store-and-Forward Switching Architecture -Back-plane (Switching Fabric): 1.6Gbps -16K MAC address table - Supports Wide Operating Temperature (-40℃~75℃)
- IP-30 Metal Housing with DIN Rail and Wall Mount Design
- DC 48V Redundant Power
- Polarity reverse protection & removable terminal block
| Specifications | |
|---|---|
| IEEE Standards | IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX IEEE802.3x Flow Control and Back Pressure IEEE 802.3at+ PoE specification |
| Switch Properties | Back-plane (Switching Fabric): 1.6Gbps Packet throughput ability (Full-Duplex): 1.488Mpps @64bytes |
| Transfer Rate | 14,880pps for Ethernet port 148,800pps for Fast Ethernet port |
| Connectors | 10/100TX: 5 x RJ-45 with auto MDI/MDI-X function Support 8 PoE injector function |
| MAC Address | 16K MAC address |
| Packet Buffer | 4Mbits |
| Processing | Store-and-Forward |
| Network Cable | 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable EIA/TIA-568 100-ohm (100m) |
| PoE pin Assignment | RJ-45 port #1 - #4 support IEEE 802.3at End-point; Alternative A mode. Positive (VCC+): RJ-45 pin 1,2 Negative (VCC-) : RJ-45 pin 3,6 Data (1,2,3,6) |
| Protocol | CSMA/CD |
| Case Dimension | Metal case,IP-30; 36.2mm(W)x105mm(D)x142mm(H) |
| Weight | 648g |
| LED | Power Indicator Green LED x 2 10/100Base-T(X) RJ45 port indicator |
| Power Supply | 48VDC (DW800-E 48-54VDC), Redundant power with polarity reverse protect function and removable terminal block 12VDC (DW800-BE 12~48VDC), Redundant power with polarity reverse protect function and removable terminal block |
| PoE Power | POE power per port 30watts @54V Maximum total power 240Watts, Supports IEEE802.3af/at for DW800-E Maximum total power 96Watts for DW800-BE |
| Consumption | 5.76 Watts (Full load: Only Ethernet) |
| Overload Current | Present |
| Reserve Polarity | Present |
| Operating Humidity | 5% to 95% Non-condensing |
| Operating Temperature | -40℃~ 75℃ / -40℉~ 167℉ |
| Storage Temperature | -40℃~ 85℃ / -40℉~ 185℉ |
| EMI/EMS | FCC Class A EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 CE EN55022 Class A, CE EN55024 |
| Stability Testing | IEC60068-2-31 (Drop off) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
| Warranty | 2 years |