Responsive image

Industrial

Description

This rugged designed high power 4 port industrial POE+ Injector is equipped with our high efficiency ColdDesign technology which allows input voltage to meet IEEE802.3af/at standard, also reduce the excessive heat problem to a minimum. And it is also equipped with 2 ports 100M fiber that can be used as fiber redundancy, cascaded to your other devices to expand your network application. It is being rigorously tested for your Security, Transportation and Telco application.

DW642SC


no abstract ...
Specification
IEEE Standard
  • IEEE 802.3 10Base-T Ethernet
  • IEEE 802.3u 100Base-TX Fast Ethernet
  • IEEE 802.3u 100Base-FX Fast Ethernet
  • IEEE802.3x Flow Control and Back Pressure,
  • IEEE802.3af for POE
  • IEEE802.3at for POE+
Switch Architecture
- Back-plane (Switching Fabric): 1.2Gbps
Data Processing
- Store and Forward
Flow Control:
- IEEE 802.3x Flow Control and Back Pressure
Jumbo Frame
-9KB
MAC address Table Size
- 1K
Packet Buffer Size
- 1M
Network Connector :
- 4xRJ-45 10/100BaseT(X) auto negotiation,
- 4 10/100M POE+ 802.3at/af PSE port
- Auto MDI/MDI-X function, Full/Half duplex
- 2x100BaseX, MM SC 2km
Network Cable
- UTP/STP above Cat.5e Cable
- EIA/TIA-568 100-ohm (100m)
- Fiber Cable (Multi-mode):50/125um,62.5/125um
- Fiber Cable (Single-mode): 9/125um
Protocol
- CSMA/CD
LED
- PW1(Power 1) Green,
- PW2(Power 2) Green,
- ERR( Fault ) Amber,
- TX/RJ-45 port:
> LNK (Link/Active) Green,
> SPD(Speed) 10/100(OFF ) ,1000 (Green)
- Fiber Per port:
> Link (Green)
> Active Flash
- POE port ON/OFF
Reserve polarity protection
- Present
Overload current protection
- Present
Power Supply
- Redundant Dual DC 12V-55V Power Input, 44VDC-55VDC for POE
Power Consumption
- 3.76W@48 VDC full load, Without POE
Alarm Relay Contact
- Relay outputs with current carrying capacity of 1 A @24VDC,
- Relay in short circuit mode when 2 powers are connected. in open circuit mode
when only one power supply is connected
POE power
- POE power per port 30watts at 48VDC input
- Maximum total power 120Watts
Removable Terminal Block
- Provide 2 Redundant power , Alarm relay contact ,6 Pin
- Wire range: 0.34mm^2 to 2.5mm^2
- Solid wire (AWG):12-24/14-22
- Stranded wire(AWG): 12-24/14-22
- Torque:5lb-In/0.5Nm/0.56Nm
- Wire Strip length: 7-8mm
Operating Temperature
- -40℃~75℃ fully tested.
POE efficiency
- Voltage efficiency up to 97% from 48VDC to 55VDC.
Surface temperature
- Surface temperature rises 6℃full load in a 75℃ chamber
Operating Humidity
- 5% to 95% (Non-condensing)
Storage Temperature
- -40℃~85℃
MTBF (mean time between failure)
- 1,510,304 hrs ( MIL-HDBK-217F) at 25℃
Housing
- Rugged Metal ,IP30 Protection
Case Dimension (W X D X H)
- 142mmx43mmx105mm (LxWxD)
Installation mounting
- DIN Rail mounting and Wall Mounting
EMC/EMS
- CE, FCC
EMI
- FCC Part 15 Subpart B Class A,
- CE EN 55022 Class A
no abstract ...