Power Over Ethernet
LAN Switch
This super high power Industrial Gigabit Switch is equipped with 4 ports 60W Gigabit PSE port to power up 60Watts PD, include outdoor speed dome, outdoor lamp, or high power PD devices. It accepts 44-56VDC input sources, especially for IP surveillance, traffic monitoring and for a broad range of applications. It can be used as a stand-alone device or can be cascaded/daisy-chain to other devices to cover wider area through the SFP connection.
Specification | |
---|---|
IEEE Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure, IEEE802.3af for POE IEEE802.3at for POE+ |
Switch Architecture | Back-plane (Switching Fabric): 12Gbps |
Data Processing | Store and Forward |
Flow Control: | IEEE 802.3x Flow Control and Back Pressure |
Jumbo Frame | 9KB |
MAC address Table Size | 1K |
Packet Buffer Size | 1M |
Network Connector : | 4xRJ-45 10/100/1000BaseT(X) auto negotiation, 4 Giga 60Watts POE+ 802.3at/af PSE port Auto MDI/MDI-X function, Full/Half duplex 2 x SFP 100/1000M BaseX |
Network Cable | UTP/STP above Cat.5e Cable EIA/TIA-568 10-ohm (100m) |
LED | PW1(Power 1) Green, PW2(Power 2) Green, ERR( Fault ) Amber, TX/RJ-45 port: LNK (Link/Active) Green, SPD(Speed) 10/100(OFF ) ,1000 (Green) SFP Fiber Per port: Link (Green) Active Flash |
DIP Switch | DIP 1: OFF: Port 5 SFP ON(DEFAULT) ON: Port 5 SFP OFF DIP 2: OFF: SFP 1000M (DEFAULT) ON: SFP 100M |
Reserve polarity protection | Present |
Overload current protection | Present |
Power Supply | Redundant Dual DC 44V-56V Power Input POE input 44-56VDC |
Power Consumption | 5.76W@48 VDC full load, Without POE Max total power 240 Watts, Max per port 60Watts |
Alarm Relay Contact | Relay outputs with current carrying capacity of 1A @24VDC, Relay in short circuit mode when 2 powers are connected. in open circuit mode when only one power supply is connected |
POE power | POE power per port 60watts. Maximum total power 240Watts. Supports IEEE802.3af/at |
Removable Terminal Block | Provide 2 Redundant power , Alarm relay contact ,6 Pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire(AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
Operating Temperature | -40℃~75℃ fully tested. |
Operating Humidity | 5% to 95% (Non-condensing) |
Storage Temperature | -40℃~85℃ |
MTBF (mean time between | 5,510,304 hrs ( MIL-HDBK-217F) at 25℃ |
Housing | Rugged Metal ,IP30 Protection |
Case Dimension (W X D X H) | 142mmx43mmx105mm (LxWxD) |
Installation mounting | DIN Rail mounting and Wall Mounting | Certifications: |
EN55022/24 | ITE equipment |
EN50155 | Railways Applications Electronic Equipment used on Rolling Stock |
EN55011 | Industrial, Scientific and Medical (ISM) equipment |
EN50121-3-2 | Railway Applications – Electromagnetic Compatibility – Part 3-2 Rolling Stock - Apparatus |
EN50121-4 | Railway Applications - Electromagnetic Compatibility - Part4 Emissions and Immunity of the Signaling and Telecommunications Apparatus |
Safety | IEC EN60950-1 |
EMC/EMS | CE, FCC, VCCI |
EMI | FCC Part 15 Subpart B Class A, CE EN 55022 Class A |
EN 50155 / EN 60068-2-6 | Vibration |
EN 50155 / EN 60068-2-27 | Shock |
EN 50155 / EN 60068-2-32 | Free Fall |