Power Over Ethernet
LAN Switch
8-Port 10/100/1000BaseT (PoE) + 2-Port 1000FX (SFP) Industrial Gigabit PoE Switch
Besides redundant power supply with overload current protection, it embeds with power din and 6-pin terminal block to prevent from power failure event and with sufficient power of up to 5A. It supports dual power backup to ensure system power loss immunity.
With 24V 120W input power, the 8-port 10/100/1000Base-T PoE Switch may support up to 30W for each PoE port and with a total power budget of maximum 100W for all the 8 PoE ports. For input voltage higher than 24V, the maximum input power is at 100W.
The DP1026GF-2448 is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It also passed stability testing such as free fall, shock and vibration.
The DP1026GF-2448 can be used in extreme environments with an operating temperature range of -40°C to 75°C.
HARDWARE SPECIFICATIONS | |
---|---|
IEEE Standards | IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX /FX IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-SX/LX IEEE802.3x Flow Control and Back Pressure IIEEE 802.3bt/at/af, PoE++ |
Switch Properties | Back-plane (Switching Fabric): 20Gbps Packet Throughput ability (Full-Duplex): 1,488,100pps @64bytes |
Transfer Rate | 14,881pps for Ethernet port 148,810pps for Fast Ethernet port 1,488,100pps for Gigabit Ethernet port |
Connectors | 10/100/1000TX: 8 x RJ-45 with auto MDI/MDI-X function
1000M fiber: 2 x 1000Mbps SFP slot for Single-mode or Multi-mode type fiber cable |
MAC Address | 8K MAC addresses |
Processing | Store-and-Forward |
Network Cable | 10BaseT: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable EIA/TIA-568 100-ohm (100m) 100/1000BaseT: 2-pair UTP/STP Cat. 5e, 6 cable EIA/TIA-568 100-ohm (100m) |
Optical Cable | Multi-mode: 50/125um~62.5/125um Single-mode: 9/125um Available distance: 2km (Multi-mode) / 30km (Single-mode) Wavelength: 1310nm (Multi-mode/Single-mode) |
Protocol | CSMA/CD |
Case Dimension | Metal case, IP-30; 44mm(W)x105mm(D)x150mm(H) |
Weight | 620g |
LED | Power Indicator: Green x 2 for PWR1 and PWR2 LAN: Green ON/Flashing for 1000M Link/Act Amber ON/Flashing for 10/100Mbps Link/Act PoE: Amber ON for PoE |
Power Supply | 24VDC~48VDC 120W, Redundant power with Power Din Connector PWR1 and 6-pin Terminal Block PWR2 up to 5 Amp |
PoE Power output | With 24V 5A input: Max. PoE total budget 100W With 48V 2.5A input: Max. PoE total budget 100W for all the 8 PoE ports. |
Power Consumption | 3.76 Watts (System Full load: Ethernet Only) |
Overload Current Protection | Present |
Polarity Reverse Protection | Present |
Operating Humidity | 5% to 95% Non-condensing |
Operating Temperature | -40°C~75°C / -40°F~167°F |
Storage Temperature | -40°C~85°C / -40°F~185°F |
EMI/EMS | FCC Class A EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 CE EN55022 Class A, CE EN55024 |
Stability Testing | IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
Warranty | 2 years |