Responsive image

Industrial

Description

This is a Power over Ethernet (PoE) gigabit Injector that not only delivers a cost-effective solution for power distribution, but also provides a seamless way of deploying Powered Devices (PDs) on existing LAN infrastructure. With the use of power injectors, it is equipped with 6KV PoE Lightning Surge Protection and generating up to 60W for PD device remotely such as wireless Access Points, pan-tilt-zoom (PTZ) IP camera, 4G/5G LTE and video-phone. It complies 4PPoE and IEEE802.3at/af standards with 56VDC power output. It can work with10/100/1000Base-T networking devices such as IP Cam and IP phone, etc.

DI100GE-AC


  • CE/FCC, UL/cUL, CB certified
  • 6KV PoE Lightning Surge Protection
  • Up to 60W of PoE Power Feeding on 4-pairs 4PPoE and
  • IEEE802.3at/af PoE standard with PD Detection via PoE pin1,2,4,5(+) & 3,6,7,8(-)
  • Over Voltage (62V max.) Protection, Over Current (2.3A max.) and Short Protection
  • Safe and Reliable Power to WLAN Access Points, 4G/5G LTE, IP Cam
  • Supports 10/100/1000Base-T LAN environment
  • Din-rail plastic housing design to well fix the installation
  • Working temperature range for whole device at -40~75℃
Hardware
No. of PoE PSE Port 1
No. of Data Port 1
Pass Through Data Rates 10/100/1000 Mbps
Power over Ethernet Output
Pin Assignment and Polarity Pin 1/2(+),4/5(+),3/6(-),7/8(-)
Output Power Voltage 56 VDC, 1.08A Maximal
User Port Power 60w Max.
Input Power AC Input Voltage 100 ~ 240 VAC, 3-pin terminal
Requirements AC Input Current 2A @100-240VAC
AC Frequency 50 to 60 Hz,2A
Dimension of Injector 90 (H) x 55 (W) x 100 (L) mm
Weight of Injector 335g
LED Indicators Data Out + PoE(Green), Data In(Green)
Connectors RJ-45 x 2
Environmental Conditions
Operating Temperature -40 to 75℃
MTBF(Mean Time B/W Failure) ≥ 5 years at 25℃, full load
Regulatory FCC part 15 Class B, EN55032 Class B
Electrostatic Discharge(ESD) 4KV air/8KV contact discharge, EN61000-4-2/-3/-4/-6/-8/-11
PoE Lightning Surge Protection 6KV, EN61000-4-5
Safety Approvals UL/cUL, IEC/EN 62368, CB
Hazardous Substances Lead free process, EU Directive 2011/65/EU "RoHS II", 2012/19/EU "WEEE", REACH compliant
no abstract ...