PW2402 is a 24-port PoE Fast Ethernet Switch with two Gigabit uplink(2 xUTP). With 24 dip switches, each PoE port can be manually set for On-Off control. You can make use of Yoda PoE repeater PR100 to extend another 100 meters or several 100 meters if multiple PR100s are used.
Every port can automatically sense your type of cable, so there is no need for crossover cables whether you are connecting this switch to another switch or to a computer.
PW2420 supports power protections as OVP (Over Voltage Protection), OCP (Over Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge protection.
This switch receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port simultaneously supports up to 200Mbps of bandwidth in full-duplex mode. This feature provides full wire speed to the connected devices and allows you to run a smooth network.
Store and Forward
It maximizes network performance while minimizing the propagation of bad network packets.
|Standards||IEEE 802.3 10BaseT|
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3x Full Duplex and Flow Control
IEEE 802.3at/af PoE compliant
|Features||MAC Address: 4K|
Buffer Memory: 512K bits
Transmission Method: Store and Forward
|Filtering/Forwarding Rates||1000Mbps port - 1,488,000pps|
100Mbps port - 148,800pps
10Mbps port - 14,880pps
|Transmission Media||10BaseT Cat. 3, 4, 5 UTP/STP|
100/1000BaseTX Cat. 5/5E UTP/STP
|PoE on each Port||30W, Total PoE budget 250W/370W/500W|
|Output PoE Pin||4,5,7,8|
|LED Indicators||Power, LAN1~28 port, PoE 1~24 port|
|Power Input||100-240VAC, 50~60Hz|
|Dimensions||480 x 118 x 44 mm (L x W x H) with holder|
|Operating Temperature||0 to 50℃|
|Humidity||10 to 90% RH (non-condensing)|
|Certifications||FCC Class A, CE|