Responsive image

SHDSL EFM

Description

The STU-LAN H302, an SHDSL (Single-pair High-bit-rate Digital Subscriber Line) LAN Extender, provides a broadband full duplex transmission with bandwidth up to 9.216Mbps over 2 pairs of copper line for point-to-point LAN connectivity between two Ethernet sites. The minimum distance can reach 10,000 feet (about 3 Km) at the maximum rate of 9.216Mbps for two pairs of 24AWG (0.5 mm) copper wire, and could reach even around 22,500 feet (about 6.8 Km) for 192Kbps. With its rate adaptive features, H302 may provide longer reach on transmission distance. Users also can select a fixed data rate ranging from 192 Kbps to 9.216 Mbps. The H302 provides a craft port for user to configure the settings and to monitor the connection status. In addition, H302 also provides an SNMP (Simple Network Management Protocol) agent for network management.

H302-SNMP


  • ITU-T Rec. G.991.2 G.shdsl Compliance
  • SHDSL Trellis Coded Pulse Amplitude Modulation (TCPAM) Line Code
  • Fixed Data Rate Selection from 4608 Kbps to 192 Kbps for each pair
  • Adaptive Data Rate from 4608 Kbps to 192 Kbps for 1-pair SHDSL mode
  • Adaptive Data Rate from 9216 Kbps to 384 Kbps for 2-pair SHDSL mode
  • Maximum Transmission Distance: 22,500 ft over 26AWG twisted pair
  • RJ-48 Connector for SHDSL line connections
  • RJ-45 Connector for 10/100 BaseT Ethernet port
  • Ethernet Auto-Negotiation for 10/100 BaseT
  • Ethernet Auto-MDIX for Auto Tx/Rx Swap
  • Telnet and Craft Port for CLI command status/configurations
  • SNMP Agent for Network Managements
  • 6 LED status indicators
  • Power feedings: 110/220VAC
no abstract ...
no abstract ...