Responsive image

Industrial

Description

4-Port 10/100TX + 1 10/100TX uplink with 4 PoE Injector Industrial Switch

The DW541-E is a 4-port 10/100TX +1 10/100TX uplink with 4 PoE Hi power booster Injector Industrial PoE Switch for plug-and-play installation. This slim switch is designed with Wall-mountable or DIN rail mountable, making installation more easy.

Besides redundant power supply with overload current protection,. Featured with relay contact to alarm system function, the DW541-E can immediately notify of power failure event.

The DW541-E is designed to meet with critical network environment with IP 30 enclosure and test under extensive Industrial EMI and Safety standards. It also passed stability testing such as free fall, shock and vibration.

The DW541-E is the best Industrial switch to connect with IP Camera, Wireless Equipments where are placed outdoor or in tight space cabinet. The DW541-E can be used in extreme environments with an operating temperature range of -40℃ to 75℃.

The DW541-E is the high power model which provides higher power output up to 30W per port for devices that require higher power supply.

DW541-E


  • System Interface/Performance
    -RJ-45 port support Auto MDI/MDI-X Function
    -Embedded 4-port PoE Injector Function
    -Store-and-Forward Switching Architecture
    -Back-plane (Switching Fabric): 1.6Gbps
    -1K MAC address table
  • Supports Wide Operating Temperature (-40℃~75℃)
  • IP-30 Metal Housing with DIN Rail and Wall Mount Design
  • DC 48V Redundant Power
  • Wide voltage input from 24V~54V Support by DW541-BE
  • Polarity reverse protection & removable terminal block
Specifications
IEEE Standards IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
IEEE802.3x Flow Control and Back Pressure
IEEE 802.3at+ PoE specification
Switch Properties Back-plane (Switching Fabric): 1.6Gbps
Packet throughput ability (Full-Duplex): 1.488Mpps @64bytes
Transfer Rate 14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Connectors 10/100TX: 5 x RJ-45 with auto MDI/MDI-X function
Support 4 PoE injector function
MAC Address 1024 MAC address
Processing Store-and-Forward
Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5, 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5, 6 cable
EIA/TIA-568 100-ohm (100m)
PoE pin Assignment RJ-45 port #1 - #4 support IEEE 802.3at End-point; Alternative A mode.
Positive (VCC+): RJ-45 pin 1,2
Negative (VCC-) : RJ-45 pin 3,6
Data (1,2,3,6)
Protocol CSMA/CD
Case Dimension Metal case,IP-30;
36.2mm(W)x105mm(D)x142mm(H)
Weight 648g
LED Power Indicator
Green LED x 2
10/100Base-T(X) RJ45 port indicator
Power Supply 48VDC (44~56VDC) for DW541-E, 12V~48VDC for DW541-BE Redundant power with polarity reverse protect function and removable terminal block
PoE Power POE power per port 30watts. Maximum 36Watts
Maximum total power 200Watts,
Supports IEEE802.3af/at
Consumption 5.76 Watts (Full load: Only Ethernet)
Overload Current Present
Reserve Polarity Present
Operating Humidity 5% to 95% Non-condensing
Operating Temperature -40℃~ 75℃ / -40℉~ 167℉
Storage Temperature -40℃~ 85℃ / -40℉~ 185℉
EMI FCC Class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
EN61000-6-2
EN61000-6-2
Stability Testing IEC60068-2-31 (Drop off)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
MTBF 510304 hrs
Warranty 2 years
no abstract ...