Power Over Ethernet
LAN Switch
PoH 95w PoE Gigabit Injector
This is a Power over Ethernet (PoE) gigabit Injector that not only delivers a cost-effective solution for power distribution, but also provides a seamless way of deploying Powered Devices (PDs) on existing LAN infrastructure. With the use of power injectors, it is equipped with 6KV PoE Lightning Surge Protection and generating up to 95W for PD device remotely such as wireless Access Points, pan-tilt-zoom (PTZ) IP camera, 4G/5G LTE and video-phone. It complies PoH and IEEE802.3at/af standards with ultra high power output. It can work with10/100/1000Base-T networking devices such as IP Cam and IP phone, etc.
Specifications | |
---|---|
No. of PoE PSE Port | 1 |
Pass Through Data Rates | 10/100/1000 Mbps | Power over Ethernet Output |
Pin Assignment and Polarity | Pin 1/2(-), 4/5(+), 3/6(+), 7/8(-) |
Output Power Voltage | 54VDC, 1.7A Maximal |
User Port Power | 95W Max. |
Input Power Range | 48~56 VDC |
Requirements AC Input Current | 100 ~ 240 VAC, 2A |
AC Frequency | 50 to 60Hz |
Dimension of Injector | 94(H) x 60(W) x 28(L)mm |
Weight of Injector | 200g |
LED Indicators | PWR, POE |
Connectors | RJ-45 x1 | Environmental Conditions |
Operating Temperature | -40 ~ +75℃ |
MTBF | ≥5 years, normal AC input with full load at 25℃ |
Mechanical Specifications | |
Regulatory | FCC part 15, Class B, EN55032 Class B, |
Electrostatic Discharge(ESD) | 4KV air/8KV contact discharge, EN61000-4-2/-3/-4/-6/-8/-11 |
PoE Lightning Surge Protection | 6KV, EN61000-4-5 |
Environmental Specifications | |
Safety Approvals | IEC/EN 62368 |
Hazardous Substances | Lead-free process, EU Directive 2011/65/EU "RoHS II", 2012/19/EU "WEEE", REACH compliant |