Responsive image

HDBaseT

Description

HB302-4K UHD (HDBaseT) CAT5 Extender is provides full 3D (all formats) & resolutions up to 4Kx2K (4 times the 1080p) with multi-channel audio over a single low cost CAT5e/6 cable. Fully compliant with HDCP, EDID and CEC control. Built-in bi-directional simultaneous IR transmission to allow extend the remote control either source or/display side. With supports PoH (Power over HDBaseT) feature which eliminating excess or unwanted power drain and also provides power to the receiver at the remote location.

HB302-4K


  • Extends UHD and IR signal over one CAT5/5e/6 cable.
  • Uncompressed high definition video up to 1080p@60Hz@48bits and 3D and 4K*2K capable.
  • Bi-directional IR, support 30-60kHz.
  • Max. Data Rate- 10.2Gbps.
  • Transmission range up to 70M by CAT5e/6 at 1080p@60Hz@24bit.
  • Audio support up to LPCM7.1, Dolby TrueHD, DTS-HD MA.
  • Support PoH (Power over HDBaseT), no external power required at receiver.
  • External power supply included for the Transmitter.
Hardware Specification
ITEM NO. HDB201-4KT HDB201-4KR
Input / Output Interface HDMI Type A x 1
UHD Video Support Up to 1080p@60Hz@48bits, 3D, 4096x2160@30Hz
UHD Audio Support LPCM 7.1 192KHz, Dolby Trued, DTS-HD MA
Distance 60M by CAT5e/6, 70M by CAT6
HDBaseT Connector RJ45 x 1
IR Carrier Frequency 30-60Khz
IR Angle ± 15° ± 55°
IR Distance 5m / Bi-directional
Power Supply DC 24V 1.25A X
Power Consumption Max 11.4W, Low Power 1.8W
Temperature Operation: 0 to 55°C, Storage: -20 TO 85°±, Humidity: up to 95%
Dimensions mm 67 x 95 x 27 (mm)
Weight g 155 165
Responsive image